Professional Condenser Microphone & Suspension Boom Scissor Arm Stand with Built-in XLR Cable and Mounting Clamp & Pop Filter & 48V Phantom Power Supply with Adapter Kit

BM-800 Microphone:

•  Polar Pattern: Uni-directional
•  Frequency Response: 20Hz-20kHz
•  Sensitivity: 34dB±2dB(0dB=1V/Pa at 1KHz )
•  Output Impedance: 150Ω±30% (at 1kHz)
•  Load Impedance: ≥1000 Ω
•  Equivalent Noise Level: 16dBA

•  S/Noise Ratio:78dB
•  Max SPL :130dB (at 1KHz≤1% T.H.D )
•  Electrical Current: 3mA
•  Microphone Output Interface: 3.5mm
•  Usage Voltage: 48V phantom power supply
•  Wire: 3.5mm inserted audio interface, 2.5m long

•  Material: Steel net + zinc alloy hand holding part

Phantom Power:
•  Power Supply: 48V phantom power
•  Phantom Power Output Voltage: DC48V
•  XLR: Input and output
•  Power Consumption: ≤5W
•  Low-noise: ≤1.8uV
•  Dimension: 3.7 x 3.43 x 1.85in/9.4 x 8.7 x 4.7cm
•  Weight: 7.41oz/210g
•  Power Adapter: Output AC 18V 600mA, input AC110V

Scissor Arm Stand:
•  Max load: 2.0KG
•  Double-braced arms equipped with super-strong spring. Adjustable angle & height to show your perfect voice.
•  Material: Steel
•  Extend up to 31.5"/80cm.

Pop Filter:

•  Screen Diameter: 6.1"/155mm
•  Neck Length: 14.8"/375mm
•  Neck Diameter: 0.3"/8mm
•  Color:Black
•  360 degree adjustable
•  Studio Microphone Mic Wind Screen Pop Filter to immediately improve the sound of your vocal recordings!
•  Plosive sounds such as "p" and "b" create a sudden burst of air pressure that can create a bassy "pop" in your vocal recordings, ruining what could have been the perfect take.

Package Contents:
•  BM-800 Condenser Microphone  * 1
•  Adjustable Suspension Scissor Arm Stand and Mounting Clamp * 1
•  Microphone Wind Screen Pop Filter Mask Shield * 1
•  Metal Shock Mount * 1

•  Male to XLR Female Cable * 1

•  Ball-type Anti-wind Foam Cap * 1
•  Table Mounting Clamp * 1
•  48V Phantom Power Supply * 1
•  3.5mm to XLR Cable * 1

•  Power adapter * 1

• NOISE REDUCE: Shock mount to reduce handling noise, ideal for radio broadcasting studio, voice-over sound studio, recording. With standard screw adapter, you can mount the mic shock mount on the standard microphone stand included.
• FREQUENCY RESPONSE: Provide vocal intelligibility, crispness and neodymium magnet for high signal-to-noise ratio. No bother to buy one of them individually.
• 48V POWER: Only works with device provide enough power with 48V phantom power adapter. If has no enough power while using with Amplifier or Mixer, the sound volume might be recorded very low. If better sound is preferred, sound card will be needed.
• APPLICATION: With cardiod (undirectional) pickup pattern suppress feedback and low self-noise, it suits for studios, recording studios, broadcasting stations, adage performance and computers.